Setting The Angle Of The Footplate; Setting The Height And Width Of The Calf Pad - Invacare Pronto M41 Series User Manual

Invacare® Pronto™ M41 Series with SureStep®
3. Loosen nuts B at the side of legrest.
It may be necessary to remove the nuts and move them
from one slot to the other.
4. Set desired length.
5. Retighten nuts.
6. Refit the calf pads and cover and retighten screws.
The legrest with foot platform is adjusted the same
way.

5.12.2 Setting the angle of the footplate

• 5/32'' (4 mm) Allen key
56
1. Fold the footplates up in order to access the adjusting
screws (1).
2. Set the adjusting screws using the Allen key.
3. Fold the footplate down again.

5.12.3 Setting the height and width of the calf pad

Risk of damage to the mobility device
– After changing the configuration of the calf
pads make sure that the calf pads contact
neither the casters nor the seat plate when
adjusting the legrest angle.
Calf pads may be adjusted independently on their respective
mounting bracket using the mounting screws at the rear of
the calf pads. Calf pads may be adjusted (for depth, height
& angle) to achieve a variety of different configurations. The
independent pad adjustments provide optimal positioning
and comfort for end users - sample configurations are
illustrated below.
1553378-G