5.5 Adjustment options for the Modulite seat
unit
5.5.1 Adjusting the height of the armrests
1. Loosen wing screw A.
2. Adjust armrest to desired height.
3. Re-tighten wing screw.
5.5.2 Adjusting the width of the armrests
WARNING!
Serious injury hazard if one of the armrests
falls out of its bracket because they have
been adjusted to a width which exceeds the
permissible value
– The width adjustment is fitted with red
markings A and the word "STOP". The
armrests must never be pulled out further
than the point at which the word "STOP" is
completely legible.
– Always tighten the fixing screws properly once
adjustments have been completed.
1553378-G
Depending on the side, the screw is accessible from
the front or the rear.
•
8 mm Allen key
Setup
35