Adjusting The Depth Of The Calf Pad; Adjusting The Height Of The Calf Pad - Invacare Pronto M41 Series User Manual

Invacare® Pronto™ M41 Series with SureStep®
1. Use the spanner to loosen the screw (1).
2. Adjust to the desired length.
3. Re-tighten the screw.

5.17.4 Adjusting the depth of the calf pad

The depth of the calf pad can be adjusted via the holding
plate. The holding plate hole combinations allow 5 different
depth settings.
• 10 mm wrench
72
1. Use the wrench to loosen the nut (1) and remove.
2. Adjust to the desired depth. Observe that the round
holes are intended for the calf pad retaining screw and
the oblong holes for the aglet without thread.
3. Screw the nut back on and tighten.

5.17.5 Adjusting the height of the calf pad

• 4 mm Allen key
1553378-G