Cisco IE 3010 Hardware Installation Manual page 69

Technical Specifications
Alarm Ratings
Table 17 Technical Specifications for the PWR-RGD-AC-DC/IA Power-Supply Module
Power Specifications
Maximum output power
Nominal input voltage
Absolute maximum (short term) input voltage
Input current
Total input BTU
Table 18 Technical Specifications for the PWR-RGD-LOW-DC/IA Power-Supply Module
Power Specifications
Maximum output power
Nominal input voltage
Absolute maximum (short term) input voltage
Input current
Total input BTU
Alarm Ratings
Table 19 Alarm Input and Output Ratings
Alarm Ratings
Alarm input electrical specification
Alarm output electrical specification
150 W
24 to 60 VDC
18 to 75 VDC
12 to 2.5 A, 18 to 75 VDC
737 BTUs per hour
8 V @ 1mA
30 V @ 1A
Note: The alarm output does not support AC voltage because the RJ-45 connector pin
spacing is too small.
69
150 W
100 to 240 VAC, 50 to 60 Hz
100 to 250 VDC
85 to 265 VAC, 47 to 63 Hz
88 to 300 VDC
AC: 2.2 to 0.7 A, 85 to 265 VAC
DC: 2.5 to 0.6 A, 88 to 300 VDC
AC: 638 BTUs per hour
DC: 750 BTUs per hour