Cisco IE 3010 Hardware Installation Manual page 16

Product Overview
Management Options
1. Only on the Cisco IE-3010-16S-8PC switch.
For a description of the LEDs, see the
Power Supply Features
The switch has two slots for power-supply modules:

PWR-RGD-LOW-DC/IA: low-voltage DC (for voltage information, see

PWR-RGD-AC-DC/IA: high-voltage AC or DC (for voltage information, see
The switch supports these power-supply module combinations:

Single low-voltage DC

Single high-voltage AC or DC

Two high-voltage AC or DC

Two low-voltage DC

One high-voltage AC or DC and one low-voltage DC
For information on installing the power-supply modules, see
See Table 4 on page 12
Management Options

Cisco IOS CLI
You can configure and monitor the switch from the CLI. Connect your management station to the switch console port
or use Telnet from a remote management station. See the switch command reference on Cisco.com for information.

SNMP network management
You can manage switches from a Simple Network Management Protocol (SNMP)-compatible management station
that is running platforms such as HP OpenView or SunNet Manager. The switch supports a comprehensive set of
Management Information Base (MIB) extensions and four Remote Monitoring (RMON) groups. See the switch
software configuration guide on Cisco.com and the documentation that came with your SNMP application for
information.
Network Configurations
See the switch software configuration guide on Cisco.com for an explanation of network configuration concepts. The
software configuration guide also provides network configuration examples for creating dedicated network segments
that are interconnected through Ethernet connections.
LEDs, page 11.
for information on the power supply LEDs.
Table 18 on page
Table 17 on page
Power Supply Installation, page 47
16
69)
69)