PIAGGIO Beverly 125 Service Station Manual page 76

Electrical system
8
9
10
Fuses
The electrical system is equipped with:
1. Four protection fuses «A». To reach the board
of fuses «A» remove the screw «B» and then the
mouldings.
2. Four protection fuses «C» for the different cir-
cuits of the electrical system, located inside the
front case to the left.
The tables show the position and characteristics
of the fuses on the scooter.
CAUTION
BEFORE REPLACING A BLOWN FUSE, FIND AND SOLVE
THE FAILURE THAT CAUSED IT TO BLOW. NEVER TRY
TO REPLACE THE FUSE WITH ANY OTHER MATERIAL
(E.G., A PIECE OF ELECTRIC WIRE).
ELE SYS - 76
Specification
Taillight bulb
Stop light bulb
License plate light bulb
Beverly 125
Desc./Quantity
Power: 12V - 10W
Quantity: 1 RHS + 1 LHS
Type: SPHERICAL
Power: 12V - 3W
Quantity: 2
Type: ALL GLASS
Power: 12V - 10W
Quantity: 1
Type: ALL GLASS
Power: 12V - 5W
Quantity: 1