PIAGGIO Beverly 125 Service Station Manual page 175

Beverly 125
- Keeping the tie rod in vertical position, insert the
bell for the Ø 35 mm stems.
- Insert the nut in the thread and take out the oil
guard
Specific tooling
020487Y Fork oil seal extractor
- Check the length of the springs.
Specification
Standard length
Standard length
Allowable limit after use:
Allowable limit after use:
Check there are no signs of wear or seizing up between the stem and the leg. Otherwise, replace the
damaged parts.
Characteristic
Maximum leg diameter
35.10 mm
Minimum stem diameter
34.90 mm
Check that the oil holes on the pumping element
are not clogged. - Check that the O-ring shows no
sign of damage.
SPRING LENGTH CHECK
Desc./Quantity
15-turn spring: 116.3 + 2-1 mm
21-turn spring: 175.7 + 2-1 mm
15-turn spring: 114.3 mm
21-turn spring: 173.7 mm
Suspensions
SUSP - 175