Section 6: Maintenance; Schedule; Cleaning & Protecting - Grizzly G0834 Owner's Manual

SECTION 6: MAINTENANCE

Schedule

To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
For optimum performance from this machine, this
maintenance schedule must be strictly followed.
Ongoing:
To maintain a low risk of injury and proper
machine operation, if you ever observe any of the
items below, shut down the machine immediately
and fix the problem before continuing operations:
• Loose mounting bolts.
• Dust or debris on and around machine.
• Dull or damaged cutterhead inserts.
• Unprotected cast-iron surfaces.
• Worn or damaged wires.
• Any other unsafe condition.
Monthly Check
V-belt tension, damage, or wear (Page 35).
•
• Clean/vacuum dust buildup from inside stand
and off of motor.
-30-
Cleaning &
Protecting
Cleaning the Model G0834 is relatively easy.
Vacuum excess wood chips and sawdust, and
wipe off the remaining dust with a dry cloth. If any
resin has built up, use a resin-dissolving cleaner
to remove it.
Protect the unpainted cast-iron surfaces on the
table by wiping the table clean after every use—
this ensures moisture from wood dust does not
remain on bare metal surfaces.
Keep tables rust-free with regular applications of
products like G96 Gun Treatment, SLIPIT
®
Boeshield T-9.
®
Recommended Metal Protectants
G5562—SLIPIT 1 Qt. Gel
®
G5563—SLIPIT 12 Oz. Spray
®
G2871—Boeshield T-9 12 Oz. Spray
®
G2870—Boeshield T-9 4 Oz. Spray
®
H3788—G96 Gun Treatment 12 Oz. Spray
®
H3789—G96 Gun Treatment 4.5 Oz. Spray
®
Figure 33. Recommended products for protect-
ing unpainted cast iron/steel parts on machinery.
Model G0834 (Mfd. Since 12/17)
, or
®