Table of Contents
Advertisement
SECTION 6: MAINTENANCE
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
Schedule
For optimum performance from this machine, this
maintenance schedule must be strictly followed.
Ongoing
To minimize your risk of injury and maintain proper
machine operation, shut down the machine imme-
diately if you ever observe any of the items below,
and fix the problem before continuing operations:
•
Loose mounting bolts.
•
Damaged tooling.
•
Worn or damaged wires.
•
Worn switch.
•
Debris and built up grime.
•
Damaged V-belt(s).
•
Any other unsafe condition.
Weekly Maintenance
•
Lubricate
quill
(Page 38).
Monthly Check
•
Check V-belt(s) for damage or wear.
•
Lubricate column rack and quill rack and
pinion (Page 38).
•
Clean/vacuum dust buildup off motor.
Model T33959/60/61 (Mfd. Since 08/23)
and
column
surfaces
Cleaning &
Protecting
Cleaning the machine is relatively easy. Vacuum
excess wood chips and sawdust, and wipe off the
remaining dust with a dry cloth. If any resin has
built up, use a resin dissolving cleaner to remove
it.
Protect the unpainted cast iron table and base
by wiping it clean after every use—this ensures
moisture from wood dust does not remain on bare
metal surfaces. Keep the table and base rust-free
with regular applications of metal protectant prod-
ucts like SLIPIT
(see Figure 56 on Page 36).
®
Lubrication
An essential part of lubrication is cleaning the
components before lubricating them.
This step is critical because grime and chips build
up on lubricated components, which makes them
hard to move. Simply adding more lubricant will
not result in smooth moving parts.
Lubricate components with recommended prod-
ucts like those shown Figure 55 in Accessories
on Page 36.
DISCONNECT
MACHINE
BEFORE PERFORMING LUBRICATION!
FROM
POWER
-37-
Advertisement
Table of Contents
