Hardware Descriptions, M4300 Series 1G Models With 10G Uplinks; Front Panel, M4300 Series 1G Models With 10G Uplinks - NETGEAR M4300 Intelligent Edge Series Hardware Installation Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Hardware descriptions, M4300 series 1G
models with 10G uplinks
This section describes the switch hardware features for the following 1G models with
10G uplinks:
• M4300-28G. Switch model with twenty-four 1G copper ports, two 10G copper ports,
and two 10G fiber ports
• M4300-28G-POE+. Switch model with twenty-four 1G copper PoE+ ports, two 10G
copper ports, and two 10G fiber ports
• M4300-52G. Switch model with forty-eight 1G copper ports, two 10G copper ports,
and two 10G fiber ports
• M4300-52G-POE+. Switch model with forty-eight 1G copper PoE+ ports, two 10G
copper ports, and two 10G fiber ports

Front panel, M4300 series 1G models with 10G uplinks

The 1G models with 10G uplinks provide twenty-four or forty-eight 1000BASE-T
autosensing ports (depending on the model, either regular, non-PoE, ports or PoE+
ports), two dedicated 10GBASE-T ports, and two dedicated 10GBASE-X SFP+ ports.
The following figure illustrates the front panel of full-width model M4300-28G.
Model M4300-28G
Figure 9. Front panel model M4300-28G
Number
1
2
3
4
Hardware Overview
Description
Power 1, Power 2, and Fan LEDs
Stack ID LED
10GBASE-T ports, each with a port LED
OOB port with port LEDs
23 Hardware Installation Guide