NETGEAR M4300 Intelligent Edge Series Hardware Installation Manual page 22

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Table 1. LEDs of the full 10G models (Continued)
LED
OOB Ethernet port LEDs
(two LEDs per port)
10GBASE-X SFP+ port
LED
(one LED per port)
Non-PoE models
10GBASE-T RJ45 port
LED
(one LED per port)
PoE model (M4300-16X)
10GBASE-T RJ45 port
LEDs
(two LEDs per ports)
Hardware Overview
Designation
Left side speed LED:
Off. No link is established on the port.
Solid green. The port established a 1000 Mbps link.
Solid yellow. The port established a 10 or 100 Mbps link.
Right side activity and link LED:
Off. No link is established on the port.
Solid green. The port established a link.
Blinking green. The port is transmitting or receiving packets.
Off. No SFP module link is established on the fiber port.
Solid green. The fiber port established a 10 Gbps link.
Blinking green. The fiber port is transmitting or receiving packets at 10 Gbps.
Solid yellow. The fiber port established a 1 Gbps link.
Blinking yellow. The fiber port is transmitting or receiving packets at 1 Gbps.
Off. No link is established on the copper port.
Solid green. The copper port established a 10 Gbps link.
Blinking green. The copper port is transmitting or receiving packets at 10 Gbps.
Solid yellow. The copper port established a 1 Gbps or 100 Mbps link.
Blinking yellow. The copper port is transmitting or receiving packets at 1 Gbps or 100
Mbps.
PoE model (M4300-16X), right side PoE status LED:
Off. A PD is not connected to the port.
Solid green. A PoE-powered device (PD) is connected and the port is supplying power
successfully.
Solid yellow. Indicates one of the following failures, which prevents the port from
supplying power:
• A short circuit occurred on the PoE power circuit.
• The PoE power demand exceeds the available power.
• The PoE current exceeds the PD's classification.
• An out-of-proper-voltage band condition occurred.
PoE model (M4300-16X), left side speed, activity, and link LED:
Off. No link is established on the copper port.
Solid green. The copper port established a 10 Gbps link.
Blinking green. The copper port is transmitting or receiving packets at 10 Gbps.
Solid yellow. The copper port established a 5 Gbps, 2.5 Gbps, 1 Gbps, or 100 Mbps
link.
Blinking yellow. The copper port is transmitting or receiving packets at 5 Gbps,
2.5 Gbps, 1 Gbps, or 100 Mbps.
22 Hardware Installation Guide