NETGEAR M4300 Intelligent Edge Series Hardware Installation Manual page 30

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Table 2. LEDs of the 1G models with 10G uplinks (Continued)
LED
PoE models
1000BASE-T RJ-45 port
LEDs
(two LEDs per ports)
10GBASE-T RJ-45 port
LED
(one LED per port)
10GBASE-X SFP+ port
LED
(one LED per port)
OOB Ethernet port
LEDs
(two LEDs per port)
Hardware Overview
Description
PoE models, left side PoE status LED:
Off. A PD is not connected to the port.
Solid green. A PoE-powered device (PD) is connected and the port is supplying
power successfully.
Solid yellow. Indicates one of the following failures, which prevents the port from
supplying power:
• A short circuit occurred on the PoE power circuit.
• The PoE power demand exceeds the available power.
• The PoE current exceeds the PD's classification.
• An out-of-proper-voltage band condition occurred.
PoE models, right side speed, activity, and link LED:
Off. No link is established on the copper port.
Solid green. The copper port established a 1000 Mbps link.
Blinking green. The port is transmitting or receiving packets at 1000 Mbps.
Solid yellow. The copper port established a 10 or 100 Mbps link.
Blinking yellow. The port is transmitting or receiving packets at 10 or 100 Mbps.
Off. No link is established on the copper port.
Solid green. The copper port established a 10 Gbps link.
Blinking green. The copper port is transmitting or receiving packets at 10 Gbps.
Solid yellow. The copper port established a 1 Gbps or 100 Mbps link.
Blinking yellow. The copper port is transmitting or receiving packets at 1 Gbps or
100 Mbps.
Off. No SFP module link is established on the fiber port.
Solid green. The fiber port established a 10 Gbps link.
Blinking green. The fiber port is transmitting or receiving packets at 10 Gbps.
Solid yellow. The fiber port established a 1 Gbps link.
Blinking yellow. The fiber port is transmitting or receiving packets at 1 Gbps.
Left side speed LED:
Solid green. The port established a 1000 Mbps link.
Solid yellow. The port established a 10 or 100 Mbps link.
Off. No link is established on the port.
Right side activity and link LED:
Solid green. The port established a link.
Blinking green. The port is transmitting or receiving packets.
Off. No link is established on the port.
30 Hardware Installation Guide