NETGEAR M4300 Intelligent Edge Series Hardware Installation Manual page 18

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Number
1
2
3
4
5
6
7
8
9
10
Common components
From left to right, the front panel of the full 10G models provides the following
components:
• Power, Fan, Stack Master, and Stack ID system LEDs (see LEDs, M4300 series full
10G models on page 21) .
Because model M4300-24X24F can support two PSUs, the front panel provides both
a Power 1 LED and Power 2 LED.
• Recessed Reset button.
• One mini USB console port.
• One USB 2.0 port.
• One RJ-45 RS232 (115200, N, 8, 1) console port (models M4300-16X, M4300-8X8F,
and M4300-24X24F).
On model M4300-12X12F, the RJ-45 RS232 console port is on the back panel.
• One out-of-band (OOB) 1G Ethernet port (models M4300-16X, M4300-8X8F, and
M4300-24X24F) with a left LED that indicates the speed and a right LED that indicates
the activity (see LEDs, M4300 series full 10G models on page 21).
On model M4300-12X12F, the OOB 1G Ethernet port is on the back panel.
• Depending on the model, eight, twelve, or twenty-four independent 10GBASE-X
SFP+ ports, each with a combined speed and activity LED (see LEDs, M4300 series
full 10G models on page 21).
• Depending on the model, eight, twelve, sixteen, or twenty-four independent
10GBASE-T autosensing ports, each with a combined speed and activity LED (see
LEDs, M4300 series full 10G models on page 21).
Hardware Overview
Description
Power 1, Power 2, and Fan LEDs
Stack ID LED
USB port
RJ-45 RS232 console port
Stack Master LED
Reset button
Mini USB console port
OOB port with port LEDs
10GBASE-X SFP+ ports, each with a port LED
10GBASE-T ports, each with a port LED
18 Hardware Installation Guide