Hardware Descriptions, M4300 Series Full 10G Models; Front Panel, M4300 Series Full 10G Models - NETGEAR M4300 Intelligent Edge Series Hardware Installation Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Hardware descriptions, M4300 series full
10G models
This section describes the switch hardware features for the following full 10G models:
• M4300-16X. Switch model with sixteen 10G PoE+ copper ports
• M4300-8X8F. Switch model with eight 10G copper ports and eight 10G fiber ports
• M4300-12X12F. Switch model with twelve 10G copper ports and twelve 10G fiber
ports
• M4300-24X24F. Switch model with twenty-four 10G copper ports and twenty-four
10G fiber ports

Front panel, M4300 series full 10G models

The full 10G models provide either a port configuration of sixteen independent
10GBASE-T autosensing ports or a port configuration of eight, twelve, or twenty-four
independent 10GBASE-T autosensing ports and eight, twelve, or twenty-four
independent 10GBASE-X SFP+ ports.
Model M4300-16X
The following figure illustrates the front panel of half-width model M4300-16X.
Figure 1. Front panel model M4300-16X
Number Description
1 Power, PoE Max, and Fan LEDs
2 Stack ID LED
3 USB port
4 RJ-45 RS232 console port
5 Stack Master LED
Hardware Overview 15 Hardware Installation Guide