Fully Managed Stackable Switch M4300-96X
Hardware Descriptions
This section describes the front panel and back panel components and the system LEDs.
Front Panel
The front panel of the switch provides the system LEDs and 12 slots in which you can install port cards.
Each port card provides its own LEDs (see
Port Cards and Port LEDs
on page 18).
The following figure shows the front panel with six port cards and six blank covers installed in the switch.
Figure 1. Front panel with six port cards and six blank covers installed
The following figure shows the front panel without any port cards or blank covers installed in the switch.
Figure 2. System LEDs and front panel showing empty chassis
Hardware Overview
12