Install A Single Half-Width Switch In A Rack - NETGEAR M4300 Intelligent Edge Series Hardware Installation Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
The following figure shows model M4300-52G-POE+. However, you install the other
full-width models in the same manner.

Install a single half-width switch in a rack

To install a single half-width switch in single rack space, you need the 19-inch rack-mount
kit supplied with the switch. The figures in the following procedure shows model
M4300-24X. However, you install the other half-width models in the same manner.
Installation 52 Hardware Installation Guide