Changing The Heating Engineer's Password - Siemens LME7 Series Basic Documentation

Note:

For the OEM to change the heating engineer's password, c: demands entry of the OEM
password!
P
P
/reset
P
/reset
P
/reset
P
P
Building Technologies Division
Infrastructure & Cities Sector
23.8.2

Changing the heating engineer's password

V h min s %
V h min s %
V h min s %
V h min s %
V h min s %
V h min s %
Basic Documentation LME7...
23 Operation via AZL2...
Parameter 041: blinks.
Press to go to level c: for password changes.
/reset
Letter c: for confirmation appears blinking.
Proceed as described in section Entering the password
and enter the former password.
After entry of the last character, the password must be
confirmed by pressing
/reset
Letter n: for new appears blinking.
Proceed as described in section Entering the password
and enter the new password (4 characters).
After entry of the last character, the password must be
confirmed by pressing
/reset
Letter r: for repeat appears blinking.
Proceed as described in section Entering the password
and repeat entry of the new password.
After entry of the last character, the password must be
confirmed by pressing
/reset
SEt confirms that the new password has been saved.
Parameter 041: blinks again.
.
.
.
CC1P7105en
29.11.2011
186/245