Info Level - Siemens LME7 Series Basic Documentation


Note:
On the info level, you can press
In place of the

Note:
You can press

P
Building Technologies Division
Infrastructure & Cities Sector
23.6

Info level

The info level displays information about the basic unit and operation in general.
button, you can also press
ESC
or
V h min s %
Parameter
Parameter value
Figure 89: Info level
Parameter
No.
Info level
102 Identification date
103 Identification number
113 Burner identification
123 Minimum power control step
140 Mode display of display and operating unit AZL2...
1 = standard (program phase)
2 = flame 1 (QRA.../ION)
3 = flame 2 (QRB.../QRC...)  not used
4 = active power (power value)
164 Number of startups resettable
166 Total number of startups
170.00 Switching cycles relay K12
170.01 Switching cycles relay K11
170.02 Switching cycles relay contact 2
170.03 Switching cycles relay contact 1
171 Max. switching cycles relay
End
Basic Documentation LME7...
23 Operation via AZL2...
or to display the next or the previous parameter.
for <1 second.
/reset
for > 8 seconds to return to the normal display.
/reset
Note:
No change of value on the info level.
If the display shows ._._ together with the parameter, the
value may consist of more than 5 digits.
When pressing
value will be displayed.
By pressing
/reset
return to the selection of the parameter no. (parameter
number blinks).
for > 1 second and < 3 seconds, the
/reset
ESC
for > 3 seconds or , you
176/245
CC1P7105en
29.11.2011