Changing The Heating Engineer's Password - Siemens LMO39 Series Basic Documentation

Β
Note!
For the OEM to change the heating engineer's password, c: requires entry of the OEM password!
VSD
F A
>1 s
/reset
/reset
/reset
/reset
48/61
Building Technologies
18.2

Changing the heating engineer's password

Basic Documentation LMO39...
18 Parameter level:
Press button combination
000: Int.
Pressing the button takes you to
/reset
parameter 041 heating engineer's password.
Parameter 041: flashes.
Press to go to level c: for password
/reset
changes.
Letter c: for confirmation appears flashing.
Proceed as described in section Entering the
password and enter the former password.
After entry of the last character, the password
must be confirmed by pressing
Letter n: for new appears flashing.
Proceed as described in section Entering the
password and enter the new password (4
characters).
After entry of the last character, the password
must be confirmed by pressing
Letter r: for repeat appears flashing.
Proceed as described in section Entering the
password and repeat entry of the new
password.
After entry of the last character, the password
must be confirmed by pressing
SEt confirms that the new password has been
saved.
You will then be taken automatically to the
next menu display 000: Int.
:
VSD
to display
F A
.
/reset
.
/reset
.
/reset
CC1P7154en
15.03.2018