Siemens LME7 Series Basic Documentation page 212

Note:



Building Technologies Division
Infrastructure & Cities Sector
When the program phase (e.g. P10 - shutdown) changes during manual adjustment, the
display blinks
Manual adjustment mode remains active until Escape switches the basic unit back to
normal operation or until the basic unit is reset via mains ON/OFF. This means that in the
case of a new heat request and after startup, the actuator or the PWM fan is driven to the
position or speed of the manually preset value
Basic Documentation LME7...
25 Operation via internal LED
212/245
CC1P7105en
29.11.2011