System Operation; Initial Setup; Startup Wizard Parameters - Toshiba H9 Installation And Operation Manual

System Operation

Initial Setup

Upon initial system power up, the Startup Wizard starts automatically. The Startup Wizard assists the
user with the initial configuration of the input power settings and the output parameters of the H9 ASD.
The Startup Wizard may also be selected and run from the
required.
The Startup Wizard querys the user to select one of the following items:
Run Now? ⇒ Continue on to item
Run Next Time? ⇒ Go to
Manually Configure? ⇒ Go to Finish screen and click Finish.

Startup Wizard Parameters

Startup parameter settings may be viewed or changed. Change the parameter setting and click Next or
click Next only without making any changes to go to the next startup parameter.
See the section titled
Startup Wizard parameters.
Click Finish to close the Startup Wizard when done.
1. The Voltage and Frequency Rating of the Motor
2. The Upper Limit
3. The Lower Limit
4. The Automatic Acceleration/Deceleration Setting.
5. The Acceleration
6. The Deceleration
7. The Volts per Hertz
8. The Motor Current
9. The Motor
10. The Command
11. The Frequency Reference
12. The Display
13. Wizard: Finish.
70
#1
Program
Startup Wizard Parameter Requirements on pg. 71
Frequency.
Frequency.
Time.
Time.
Setting.
Rating.
RPM.
Source.
Source.
Unit.
Program
below.
Mode.
(a selection is required for Next or select Finish).
menu after the initial startup, if
for further information on the
H9 ASD Installation and Operation Manual