H9 Asd Optional Devices - Toshiba H9 Installation And Operation Manual

H9 ASD Optional Devices

The ASD may be equipped with several options which are used to expand the functionality of the ASD.
Table 23 lists the available options and their functions.
Part Identifier
ASD-CAB-USB
ASD-EOI-HH-G9
ASD-MTG-KIT9
ASD-TB1-SIM9
DEV002Z
ETB003Z
ETB004Z
PDP002Z
USB001Z
VEC007Z
VEC004Z
VEC005Z
VEC006Z
Note: See the user manual of the applicable option for further information on each item.
270
Table 23. H9 Optional devices and functions.
Device Name
H9 USB Communication Cable
Display Module Docking Station
9-Series EOI Remote Mounting Kit
ASD Input/Output Signal Simulator
DeviceNet Module
Expansion I/O Board 1
Expansion I/O Board 2
ProfiBus DP Module
USB-to-Serial Converter
PG Vector Feedback Board
PG Vector Feedback Board
PG Vector Feedback Board
PG Vector Feedback Board
Device Function
Used to connect the ASD to a PC via the USB port of the
PC.
Used to flash the 9-series display module.
Hardware used to mount 9-series ASD EOI remotely.
Used to simulate the ASD I/O monitor and control signals.
Allows the H9 ASD to communicate via DeviceNet with
other DeviceNet-supported equipment including a host
computer.
Expands the Input/Output functionality of the H9 ASD.
Expands the Input/Output functionality of the H9 ASD.
Allows the H9 ASD to communicate via ProfiBus with
other ProfiBus-supported equipment including a host
computer.
Allows for the USB port of a computer to be used as a
communications port for monitoring and controlling the
H9 ASD.
Allows for the use of Vector Control using a sensor (for
use with a 5-volt encoder).
Allows for the use of Vector Control using a sensor (for
use with a 12-volt encoder).
Allows for the use of Vector Control using a sensor (for
use with a 15-volt encoder).
Allows for the use of Vector Control using a sensor (for
use with a 24-volt encoder).
H9 ASD Installation and Operation Manual