Speed 1 Operation Time; Speed 2 Operation Time; Speed 3 Operation Time; Speed 4 Operation Time - Toshiba H9 Installation And Operation Manual

F540

Speed 1 Operation Time

Program ⇒ Pattern Run ⇒ Operation Time
This parameter sets the run-time for Preset Speed #1.
This time is effective when used with Group Speeds and non-Group Speeds.
If the Auto-Restart function is activated, the search time required for the Auto-
Restart function will be subtracted from the Operation Time setting; resulting
in a shorter run time.

Speed 2 Operation Time

Program ⇒ Pattern Run ⇒ Operation Time
This parameter sets the run-time for Preset Speed #2.
This time is effective when used with Group Speeds and non-Group Speeds.
If the Auto-Restart function is activated, the search time required for the Auto-
Restart function will be subtracted from the Operation Time setting; resulting
in a shorter run time.

Speed 3 Operation Time

Program ⇒ Pattern Run ⇒ Operation Time
This parameter sets the run-time for Preset Speed #3.
This time is effective when used with Group Speeds and non-Group Speeds.
If the Auto-Restart function is activated, the search time required for the Auto-
Restart function will be subtracted from the Operation Time setting; resulting
in a shorter run time.

Speed 4 Operation Time

Program ⇒ Pattern Run ⇒ Operation Time
This parameter sets the run-time for Preset Speed #4.
This time is effective when used with Group Speeds and non-Group Speeds.
If the Auto-Restart function is activated, the search time required for the Auto-
Restart function will be subtracted from the Operation Time setting; resulting
in a shorter run time.

Speed 5 Operation Time

Program ⇒ Pattern Run ⇒ Operation Time
This parameter sets the run-time for Preset Speed #5.
This time is effective when used with Group Speeds and non-Group Speeds.
If the Auto-Restart function is activated, the search time required for the Auto-
Restart function will be subtracted from the Operation Time setting; resulting
in a shorter run time.

Speed 6 Operation Time

Program ⇒ Pattern Run ⇒ Operation Time
This parameter sets the run-time for Preset Speed #6.
This time is effective when used with Group Speeds and non-Group Speeds.
If the Auto-Restart function is activated, the search time required for the Auto-
Restart function will be subtracted from the Operation Time setting; resulting
in a shorter run time.
H9 ASD Installation and Operation Manual
Direct Access Number — F540
Parameter Type — Numerical
Factory Default — 5.0
Changeable During Run — Yes
Minimum — 0.1
Maximum — 6000.0
Units — F520 Setting
Direct Access Number — F541
Parameter Type — Numerical
Factory Default — 5.0
Changeable During Run — Yes
Minimum — 0.1
Maximum — 6000.0
Units — F520 Setting
Direct Access Number — F542
Parameter Type — Numerical
Factory Default — 5.0
Changeable During Run — Yes
Minimum — 0.1
Maximum — 6000.0
Units — F520 Setting
Direct Access Number — F543
Parameter Type — Numerical
Factory Default — 5.0
Changeable During Run — Yes
Minimum — 0.1
Maximum — 6000.0
Units — F520 Setting
Direct Access Number — F544
Parameter Type — Numerical
Factory Default — 5.0
Changeable During Run — Yes
Minimum — 0.1
Maximum — 6000.0
Units — F520 Setting
Direct Access Number — F545
Parameter Type — Numerical
Factory Default — 5.0
Changeable During Run — Yes
Minimum — 0.1
Maximum — 6000.0
Units — F520 Setting
F545
177