Naming Cds - Blaupunkt TravelPilot DX-R70 Operating Instructions Manual

Deleting all playlists in memory
If you want to delete all the playlists in memory,
1 press the softkey assigned to CLR ALL.
A confirmation request appears.
If you are sure you want to delete all the programmed playlists,
2 select YES with the
Press the OK button 8.
3

Naming CDs

The TravelPilot provides you with the option of naming CDs. The name can be
up to seven characters long.
TIP: The name that you give a CD is stored in memory even after you
remove the CD from the changer. If you insert the CD again at a later
time, the name will still be available.
If you want to name a CD,
1 select the required CD in the main menu,
select the functions menu by pressing the CD.C button @ and
2
3 use the NAME softkey to open the CD name menu.
4 Press the softkey assigned to the EDIT menu item.
Entering a name
The speller opens.
5 Use the / and
selection marker to the first letter of the name you wish to enter.
INTRODUCTION NAVIGATION
button on the rocker switch 7.
buttons on the rocker switch 7 to move the
/
RADIO MODE
MIX
SCAN
REPEAT
CLR NAME
CLR ALL
CD MODE CD CHANGER
CD
PROGRAM
NAME
EDIT
SETUP INDEX
89