Blaupunkt TravelPilot DX-R70 Operating Instructions Manual page 78

INTRODUCTION NAVIGATION
Entering a name
1 Use the / and
selection marker to the first letter of the name you wish to enter.
The currently highlighted letter is displayed in an enlarged fashion within
the magnifier on the right of the display.
Press the OK button 8.
2
The letter is entered into the name line at the top.
3 Continue in this manner with the remaining letters of the name.
Once you have finished entering the name,
keep the OK button 8 pressed for longer than two seconds or
4
symbol and press the OK button 8.
4 highlight the
The name is stored and the unit switches to the CD functions menu. The
name is displayed in the functions area of the main CD menu.
Deleting characters
If you want to delete a letter that you have just entered,
press the ESC button < or
1
symbol and press the OK button 8.
1 highlight the
Deleting the current name
To delete the name of the current CD,
1 switch to the CD name menu,
2 press the softkey assigned to CLR NAME.
The name is deleted. The name will also be deleted if you open the spel-
ler again and close it by pressing the
button 8 for a longer period of time.
RADIO MODE
buttons on the rocker switch 7 to move the
/
symbol or by pressing the OK
CD MODE CD CHANGER
ABCDEFGHIJKLMNO
PQRSTUVWXYZ -/.
ÄÖÜ 1234567890
CLR NAME
CLR ALL
SETUP INDEX
CD NAME
S
_
STONES
EDIT
78