Blaupunkt TravelPilot DX-R70 Operating Instructions Manual page 74

INTRODUCTION NAVIGATION
Starting internal CD playback (no CD changer is connected)
If an audio CD is inserted and no CD changer is connected,
press the CD.C button @.
1
The unit switches to the main CD menu and CD playback begins. If no
audio CD is inserted, a message informing you of this appears in the
display.
Starting internal CD playback (a CD changer is connected)
If a CD is inserted in the internal CD drive and a CD changer is connected, the
unit switches to the main CD menu after you press the CD.C button @. The CD
source (CD or CD changer) that was last active will be played.
If the last CD that was listened to was played in CD changer mode, the unit
opens the main CD changer menu.
If you want to activate the internal CD drive,
press the CD.C button @ again.
1
The CD functions menu for CD changer mode opens.
2 Press the softkey assigned to the CD menu item.
If there is no audio CD inserted in the internal CD drive, a lock symbol
appears in front of the CD menu item, and the item cannot be selected.
Switching the playing time display on/off
During CD playback, you have the option of displaying either the track number
and the track playing time or just the track number in the title line of the main CD
menu.
If you want to switch the playing time display on / off,
open the CD mode menu by pressing the MENU button : and
1
RADIO MODE CD MODE CD CHANGER SETUP
MIX
SCAN
REPEAT
TIME ON OFF
INDEX
74
CD
PROGRAM
NAME
TA