INTRODUCTION
NAVIGATION
The software is loaded from the CD. The progress is indicated in the
display.
Note: The process of loading the software from the navigation CD
must not be interrupted.
Starting navigation
Press the NAV button ? whilst the unit is switched on.
1
The main navigation menu opens. If a navigation session is already ac-
tive, the navigation display will appear.
Before navigation can begin, a DX navigation CD must first be inserted in the
unit and a destination selected.
Entering a destination
The destination can be entered from the destination memory or by entering a
town, a town centre, a road, a junction or house number, or by selecting a spe-
cial destination (e.g. motorway junction, train station, etc.).
buttons on the rocker switch 7 to select the
1
Use the
/
menu item.
Confirm your selection by pressing the OK button 8.
2
Destinations
The following destinations are allowed:
•
the town centre or centre of a district in cities,
•
a road,
•
a junction where two or more roads intersect,
•
a house or housing block.
RADIO MODE
CD MODE
CD CHANGER
SETUP
Main navigation menu
INDEX
18