Naming Cds - Blaupunkt Arizona DJ70 Operating Instructions Manual

The Blaupunkt IDC A09 CD changer is in-
cluded with the Arizona DJ70.
The Blaupunkt CDC A08 CD changer is in-
cluded with the Missouri DJ70 and the Wash-
ington DJ70.
CD changers can be obtained as accessories
for the Madrid C70 and Milano C70. On page
33 of this guide you can find which CD chang-
ers can be used. You can also refer to your
Blaupunkt dealer.
Note:
The operating instructions for your CD chang-
er will provide information about handling
CDs, inserting them and operating the CD
changer.
Press the CDC button, =.
The CD changer menu is displayed, and play
will continue from the point where it was last
interrupted. If the magazine is removed from
the CD changer and re-inserted, play will start
with the first track on the first CD detected by
the CD changer.
In order to change up or down to anoth-
er CD, press the
the number of the CD you want appears
on the display.
In order to change up or down to anoth-
er track on the current CD, press the
button, 7, until the number of the
or
track you want appears on the display.
button, 7, is pressed once the cur-
If the
rent track is started again.
button, 7, until
or
In order to search rapidly backwards or for-
wards
hold down one of the
7, until the fast search backwards of
forwards starts.
You can choose between different display
modes during CD changer operation:
Display of CD number, track number
and time.
Display of CD number, track number
and playing time.
Display of CD name and track number.
In order to change between the display
modes, press the DIS button, :, as of-
ten as you need for the desired informa-
tion to be shown on the display.
Note:
It is only possible for a CD name to be dis-
played if the inserted CD has been provided
with a name. Read the section on "Naming
CDs".
Press the softkey, 4, indicating "RPT".
"RPT TRCK" appears briefly on the display.
In order to repeat play of the whole CD,
press the softkey, 4, indicating "RPT"
again.
"RPT DISC" appears briefly on the display.
In order to stop repeating either the current
track or the current CD
press the softkey, 4, indicating "RPT" as
often as necessary for the "RPT OFF" to
be shown in the display.
or buttons,
49