Scanning Tracks (Scan); Repeating A Track (Repeat); Interrupting Play (Pause); Changing The Display - Blaupunkt CASABLANCA CD52 Operating Instructions Manual

Scanning tracks (SCAN)

You can briefly listen in to all the tracks
on a CD.
Hold down the OK button ; for
more than two seconds. The next
track starts to play.
Note:
The scanning time is adjustable. Read
about setting the scanning time in the
section "Setting the scanning time" in
the chapter "Radio mode".
Stopping SCAN and continuing
playback
Press the OK button ; to end
scanning.
The current track will then continue to
play.

Repeating a track (REPEAT)

If you would like to repeat a track,
press button 4 RPT >.
"REPEAT TRCK" appears briefly on the
display, the RPT symbol lights up. The
track is then repeated until RPT is de-
activated.
Stopping REPEAT
If you would like to end repeat,
press the button 4 RPT > once
again.
"REPEAT OFF" appears briefly on the
display, the RPT symbol goes out. Nor-
mal playback is resumed.

Interrupting play (PAUSE)

Press the button 1
"PAUSE" appears on the display.
Ending Pause
Press the button 1
pause.
Play then resumes.

Changing the display

To alter the display between track
number and time or track number
and playing time or track number
and CD name, press the
7 button once or several times for
more than two seconds until the
desired elements appear on the
display.
Traffic announcements in CD
mode
If you want to receive traffic an-
nouncements whilst listening to a
CD, press the TRAF ? button.
Traffic announcement priority is active
when the traffic-jam symbol lights up on
the display. Please see the chapter "Traf-
fic information".

Naming CDs

To make it easier for you to recognise
your CDs, the car radio offers an indi-
vidual name option for 30 CDs. The
names should have a maximum of eight
digits. If you attempt to allocate more
than 30 names, "FULL" will appear on
the display.
CD MODE
>.
> during the
/ DIS
45