Blaupunkt TravelPilot DX-R70 Operating Instructions Manual page 83

The functions area in the centre of the display contains the numbers or
names of the first five CDs in the changer.
In addition, a menu item is displayed so that you can open the second
page of the main CD menu.
Note: Since the IDC - A09 has a capacity of five CDs, there is no
second page in the main menu if an IDC - A09 is connected.
In the bottom line (the status line) you will see the following displayed from left to
right:
- a symbol indicating whether a navigation or an audio CD is inserted,
- symbols for the SCAN, MIX and RPT modes (the symbols are not available
if the clock is activated in the status line. For further information on the status
line clock, read "Setting the clock" in the "Setup" chapter).
- a symbol indicating the current audio source,
- the status of the TA function and
- the status of the TMC function.
Switching between the main menu and functions menu
To switch between the main menu and functions menu in CD changer mode,
press the CD.C button @.
1
The functions menu opens.
Opening the setup menu
If you want to open the setup menu for CD changer mode,
press the MENU button :.
1
INTRODUCTION NAVIGATION RADIO MODE CD MODE
STONES
COCKER
MOZART
CD CHANGER SETUP
DOORS
BACH
CD 6-10
83
INDEX