Blaupunkt TravelPilot DX-R70 Operating Instructions Manual page 70

INTRODUCTION NAVIGATION
Switching TIM on / off, changing the recording standby time
When the car radio is switched on, you can turn the TIM function on / off as
follows.
Press the T button 9.
1
The traffic menu appears in the display.
2 Keep pressing the softkey associated with the TIM menu item until the
required option 2H (for 2 hours recording standby), 24H (for 24 hours
recording standby) or OFF appears.
Note: You can also switch TIM off by keeping the T button 9 pres-
sed for longer than two seconds whilst the traffic menu is being
displayed.
If TIM is switched on, the traffic information provided by a tuned traffic informa-
tion station will be recorded after the unit is switched off.
TIP: You can also set TIM recording standby mode when you switch the
unit off.
When you switch the unit off, GOODBYE appears in the display together
with the options for setting TIM standby.
Keep pressing the T button 9 until the required 2H, 24H or OFF option is
1
highlighted.
Listening to stored traffic messages
The unit can record 14 traffic messages.
To listen to the stored traffic messages,
press the T button 9.
1
2 Press the softkey assigned to the TIM-INFO menu item.
RADIO MODE CD MODE CD CHANGER SETUP
TRAFFIC
TIM 24H
INDEX
70
TIM-INFO
V-INFO