Trepeating Tracks (Repeat); Naming Cds - Blaupunkt TravelPilot DX-R70 Operating Instructions Manual

Repeating tracks (REPEAT)
To repeat a track, activate the repeat function.
Proceed as follows:
1 Select the required track,
2 switch to the functions menu in CD mode by pressing the CD.C button
@ and
3 press the softkey assigned to the REPEAT menu item.
The track is repeated until the repeat function is cancelled. RPT appears
in the status area of the main CD menu.
4 Switch back to the main menu in CD mode by pressing the CD.C button
@.
If you want to cancel the repeat function,
1 repeat steps 2 - 4.

Naming CDs

The TravelPilot provides you with the option of naming CDs. The name can be
up to seven characters long.
TIP: The name that you give a CD is stored in memory even after you
remove the CD from the unit. If you insert the CD again at a later time,
the name will still be available.
If you want to name a CD,
1 switch to the functions menu in CD mode by pressing the CD.C button
@ and
2 use the NAME softkey to open the CD name menu.
3 Press the softkey assigned to the EDIT menu item.
The speller opens.
INTRODUCTION NAVIGATION RADIO MODE CD MODE
MIX
SCAN
REPEAT
MIX
SCAN
REPEAT
CD CHANGER SETUP
CDC
PROGRAM
NAME
CDC
PROGRAM
NAME
77
INDEX