Blaupunkt TravelPilot DX-R70 Operating Instructions Manual page 52

INTRODUCTION NAVIGATION
Saving a position marker
After you press the OK button 8, a selection menu opens. You are now given
the option of assigning a name to the position marker or returning to the menu in
which you set the position marker.
If you select the option and enter a name for the position marker, the
name will be automatically stored in the destination memory.
1 Select the menu item.
A speller will open for you to enter the short name.
2 Enter a short name,
keep the OK button 8 pressed for longer than two seconds or
3
symbol and press the OK button 8.
3 select the
The position marker is saved in the destination memory with the short
name that you entered.
If you selected , the menu from which you set the position marker will
be opened without a short name being saved for the position marker.
The position marker is then saved together with the time in the
memory in the destination memory.
Note: A maximum of five position markers (together with the time)
can be saved in the
RADIO MODE CD MODE
memory.
CD CHANGER SETUP
_
INDEX
52
E