Blaupunkt TravelPilot DX-R70 Operating Instructions Manual page 38

INTRODUCTION NAVIGATION
You can now move the destination to the required position in the tour memory:
Press the OK button 8.
1
A reposition marker appears in front of the destination.
buttons on the rocker switch 7 to move the destination to
2 Use the /
the required position in the tour list.
Press the OK button 8.
3
Using a destination from the destination memory as a new tour
destination
1 To assign a tour destination from the destination memory, select the
item in the
Press the OK button 8.
2
The menu appears.
3 Select
The
4 Select the destination memory from which you would like to use a desti-
nation.
The contents of the selected destination memory are displayed.
5 Select the destination that you want to use in the tour list.
Press the OK button 8.
6
The tour list is displayed. You can now move the destination to the re-
quired position.
Using the navigation system's last destination
To use the navigation system's last (current) destination,
1 select the
Press the OK button 8.
2
The destination is entered in the tour list. The tour list is displayed.
RADIO MODE
menu.
.
menu appears.
item in the
CD MODE CD CHANGER
menu.
SETUP INDEX
38