Blaupunkt TravelPilot DX-R70 Operating Instructions Manual page 71

The latest message always has the highest number and is played first.
The other traffic messages follow in descending order. The display shows
the time at which the traffic message was received.
After the last message is heard, the unit returns to the previous mode of
operation.
To continue listening to the audio source that was active last without first having
to listen to all the traffic messages,
press the T button 9 or ESC button <.
1
Deactivating TIM recording standby
(whilst in the car wash)
Before you drive into a car wash,
1 switch the radio off.
GOODBYE appears in the display together with the options for setting TIM
standby.
Keep pressing the T button 9 until the OFF option is highlighted.
2
TIM recording standby is deactivated, the antenna retracts (please make
sure that this actually happens) and remains retracted until the car radio
is switched on again.
1 You can drive into the car wash.
When you switch the TravelPilot on again, you have to re-activate TIM recording
standby.
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP
71
INDEX