Blaupunkt TravelPilot DX-R70 Operating Instructions Manual page 6

INTRODUCTION NAVIGATION
If you press the OK button for longer than
two seconds after entering the destina-
tion, the list of destination towns appears.
Use the keys on the rocker switch to
move the selection marker to the name of
the town you require.
Once the selection marker is positioned
over the name of the town you require,
press the OK button.
RADIO MODE CD MODE
In the following selection, choose be-
tween ,
the area.
Streets can only be selected if the data
are available on the navigation CD that is
being used. Menu items that cannot be
selected are marked with a lock.
If you selected
quently also enter junctions or house
numbers. Enter the name in the same
way as you did for
Select if you want to be guided
directly to the centre of a town district.
Once you have finished entering your
destination, navigation begins automati-
cally.
CD CHANGER
Navigation begins.
or destinations in
The visual driving recommendations ap-
pear in the left of the display.
In the centre you will see a display that
provides a symbolic representation of the
distance to the next decision point (e.g. a
crossing).
, you can subse-
On the right you will see information on
the current time, arrival time or remaining
journey time as well as details on the set
.
audio source, i.e. radio, CD changer (op-
tional) or internal CD drive (only available
with NO-MAP navigation).
During active navigation you can control
the audio functions as usual using the
rocker switch.
You can switch to audio mode at any time
using the TUNE and CD·C source but-
tons. Navigation will then be continued
with voice output only.
To display navigation mode again, press
the NAV button.
SETUP INDEX
6