Blaupunkt TravelPilot DX-R70 Operating Instructions Manual page 34

INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX
34
In the right of the display you can optionally display either the approxi-
mate remaining journey time to the destination, the approximate arrival
time or the current time. For further information, read the section entitled
"Selecting time info".
The distance as the crow flies appears beneath the time display whilst
the route is being calculated. Once route calculation is complete, this
distance is replaced by the road distance to the destination.
The status of the TA traffic information announcement function and the
TMC status are displayed symbolically in a status line. For further infor-
mation on the TA function, read the section entitled "Traffic announce-
ments during navigation" in this chapter, and the sections entitled "TA
traffic announcement" and "TMC" in the "Radio mode" chapter.
The lower right-hand line in the display is used to display the active audio
source. When you are listening to the radio, this area of the display con-
tains the station name or the frequency of the tuned station (for further
information, read "Radio mode with RDS"). If the CD changer (optional)
is active, the number of the current CD and the track number or the track
number and the track playing time are displayed here. Whilst telephone
mute is activated, will appear in this display area.
During a NO MAP navigation session, you can also use the internal CD
drive to play audio CDs. If that is the case, this display area will contain
Navigation session display, 3D display
the number of the current track and the playing time.
TIP: Whilst the navigation session menu is active, the six softkeys and
the rocker switch 7 have the same function as they do in the main menu
of the audio source that is currently active in the background. This means
that you can access the most important primary functions of the active
audio source at any time without having to leave the navigation session
menu.