Blaupunkt TravelPilot DX-R70 Operating Instructions Manual page 31

5 Select the required destination.
Navigation begins. For further information, read the section entitled "Nav-
igation".
Entering a destination – from the destination memory
You can save destinations, which you drive to regularly, in the destination mem-
ory so that you can access them easily for other navigation sessions. To save
and edit destinations in the destination memory, read the section entitled "Des-
tination memory".
There are four different destination memories available:
- : Memory for the last ten destinations that you drove to during
navigation. The destinations are stored automatically in the LAST 10
memory when the
For further information, read the section entitled "Destination memory".
- : Position markers set by you can be selected as your
destination.
- : The destinations stored in the destination memory are
displayed in alphabetical order.
- : The stored destinations are displayed in the specific
order set by you.
To access destinations from the destination memory,
1 switch to the main navigation menu.
2 Open the
3 Select the destination memory from which you would like to choose the
destination for your navigation session.
TIP: You can also access the LAST 10 destination memory using the
macro button (for further information, read the section entitled "Program-
ming the macro button" in the "Setup" chapter).
INTRODUCTION NAVIGATION
option is activated in the navigation menu.
menu item.
RADIO MODE
Destination memory menu
CD MODE CD CHANGER SETUP INDEX
31