Frymaster H55 Series Technical Reference Manual page 56

Hide thumbs Also See for H55 Series:

The reed switch is visible in the rear of the ﬁ lter

cabinet (top right) and close-up (right). The

button-size magnet is circled on the pan front

(below).

Manual Draining, Filling, Filtering with MIB

1 1

1. Press the M button, which switches the board to manual. The display becomes

the number of the vat to be controlled manually.

2. Press the vat selector button until the desired vat number is displayed.

3. Press the drain button to drain the oil or press and hold the return button to return

oil to the vat displayed. Opening the drain and pressing and holding the return

button after valve is open allows ﬁ ltration.

4. Pressing the M button again returns the board to automatic mode.

Automatic Filtering Fryers

Detecting the Filter Pan

The ﬁ lter pan must be present in the fryer for auto ﬁ ltering to

function. A circuit, closed when the pan is in place by a reed

switch in the cabinet interior (left and below) and a magnet on

the pan's front edge (circled below), tells the system that the

pan is in place. The P, displayed on the MIB, goes away when

the pan is detected.

The placement of the switch and the magnet has varied over

time and auto ﬁ ltering fryer models.

4-12

3 3

Ocf series Filterquick series Lov series