Frymaster H55 Series Technical Reference Manual page 113

Installation
Th e fryer requires attention to detail as it is installed.
• It must be carefully removed from the pallet to ensure the
fi lter system and the box holding the fi lter interface components
are not damaged.
• It must be leveled to ensure the top off system works accurate-
ly.
• Th e manifold and burner gas pressure
should be checked.
• Th e JIB brace must be removed from
the fryer cabinet.
• A JIB placed in the cabinet.
• Th e staff must be trained on the new
fryer.
In some instances, the installation, or
commissioning, can be done by an in-
house installation company and the
demonstration and checks done by an
FAS. Videos covering commissioning and
demonstration are posted. See
links on 5-1.
Diff erent Models, Diff erent
Manuals
Th e FilterQuick fryer with
a touchscreen controller was
initially built on a chassis used
on a Japanese-specifi c fryer. Th e
current production, which began
in December 2017, fryer is built
on a diff erent platform.
Due to the diff erent platforms,
there are two parts manuals.
819-7446 for the earlier fryer
and 819-7478 for the later
model.
Th e most pronounced visual
diff erence between the fryers
is the style of door handle.
Th e earlier fryer has black
recessed door handles. Th e
newer model has curved
stainless handles on the top of the door.
Touchscreen-Equipped Fryers
The brace (above) that stiffens the cabinet for transport must be re-
moved and a JIB placed in the cabinet (right) during the setup.
FQGLA-T (early)
FilterQuick Training Module
5-10
The standards holding the fryer to the pallet must
be carefully removed to avoid damage to the fi lter
system.
FQG30-T (current)
FQ4000 Control-
FQG30-T Parts
ler/TB
Scan with QR-code reader to access man-
uals. Click links to access posted training
modules. Cover adjacent QR-codes to
retrieve desired manual.
FQGLA-T Installa-
tion/Operation
FQGLA-T Parts
FQGLA-T Service
FQ4000 Con-