Toshiba Satellite 1400 Series Maintenance Manual page 398

4 Replacement Procedures
16. Apply the protective cover-G, the protective cover-S, the aluminum tape, the filament
tape, the polyimide tape and the wire-protective tape.
Polyimide tape
+2
1mm
- 0
Apply the aluminum tape on the side of the top frame
and fold the tape along the top frame.
Figure 4-164 Applying the protective covers and tapes
4-190
Align the center of the polyimide tape with the edge of the top frame.
A base line on the P-chassis
Apply along the top frame.
First apply the protective cover-G then S.
Align the holes on the protective cover
with the pins on the P-chassis.
Wire-protective tape
Route along
the indentation.
Route the cable upward
on the edge of the P-chassis.
Align the edge of the tape with this line.
The center of the module.
Satellite 1400/2400 Series Maintenance Manual (960-364/365)
4.37 TFT FL (Model 15.0 SHARP)
Protective cover-S
Apply along the top frame.
Aluminum tape
Protective cover-G
Apply along
the top frame.
Filament tape
Align the edge of the tape
with the edge of the frame.