System Board; Removing The System Board - Toshiba Satellite 1400 Series Maintenance Manual

4.19 System Board

4 s

4.19 System Board

Removing the System Board

To remove the system board, follow the steps below and refer to figures 4-42 and 4-43.
1. Remove three M2.5×6 black flat-head screws securing the system board.
2. Remove the following two stud screws:
• One M2.5×6 stud screw
• One M2.5×14 stud screw
M2.5×14 stud screw
M2.5×6 black flat-head screw
Figure 4-42 Removing the screws securing the system board
Satellite 1400/2400 Maintenance Manual (960-364/365)
4 Replacement Procedures
M2.5×6 black flat-head screw
M2.5×6 stud screw
4-65