Installing The Dc-In Cable - Toshiba Satellite 1400 Series Maintenance Manual

4 Replacement Procedures

Installing the DC-IN Cable

To install the DC-IN cable, follow the steps below and refer to figures 4-37 and 4-38.
1. Seat the DC-IN cable and connect it to PJ8800 on the system board. Be careful not
to damage the cable or connector.
2. Seat the plastic brace.
3. Secure the plastic brace with two M2.5×6 black flat-head screws.
4-60 Satellite1400/2400 Maintenance Manual (960-364/365)
4.17 DC-IN Cable