4.16 CD Switch Board
Installing the CD Switch Board
To install the CD switch board, follow the steps below and refer to figures 4-35 and 4-36.
1. Seat the CD switch board on the front cover assembly.
2. Secure the CD switch board with two M2.5×4 black flat-head screws.
3. Connect the CD SUMI card to PJ7300 on the CD switch board.
4. Seat the front cover assembly.
5. Secure the front cover assembly with three M2.5×4 black flat-head screws.
Satellite1400/2400 Maintenance Manual (960-364/365)
4 Replacement Procedures
4-57