Toshiba Satellite 1400 Series Maintenance Manual page 117

3.2 Executing the Diagnostic Test
3. Select the option you want to execute and press Enter. The following message will
appear:
SYSTEM TEST
SUB-TEST : XX
PASS COUNT: XXXXX
WRITE DATA: XX
ADDRESS : XXXXX
SUB-TEST MENU :
01 - ROM checksum
02 -
03 -
04 - Fan ON/OFF
05 - Thermister Check
06 - Quick charge
07 - DMI read
08 - DMI write
99 - Exit to DIAGNOSTIC TEST MENU
NOTE: The menu displayed by your computer may be slightly different from the
one shown above.
4. Select the desired subtest number from the subtest menu and press Enter. The
following message will appear:
TEST LOOP : YES/NO
Selecting YES increases the pass counter by one, each time the test cycle ends and
restarts the test cycle.
Selecting NO returns the subtest menu to the main menu after the test is complete.
Satellite 1400/2400 Maintenance Manual (960-364/365)
XXXXXXX
ERROR COUNT: XXXXX
READ DATA : XX
STATUS : XXX
3 Tests and Diagnostics
xxxxxxx DIAGNOSTIC TEST VX.XX
[Ctrl]+[Break] : test end
[Ctrl]+[C] : key stop
↑↓ →← : Select items
Enter: Specify
Esc : Exit
3-5