Installing The Lcd Module - Toshiba Satellite 1400 Series Maintenance Manual

4 Replacement Procedures

Installing the LCD Module

To install the LCD module, follow the steps below and refer to figures 4-58 to 4-61.
1. Seat two metal braces and secure each with two silver super flat-head M2×3
screws.
2. Connect the LCD/FL cable to the LCD module.
3. Secure the LCD/FL cable with the tape.
4. Seat the LCD module and secure it with four M2×4 screws.
CAUTION: Make sure the cables lie inside the guide. Be careful not to damage or pinch
any cables when you seat the LCD module.
4-88 Satellite 1400/2400 Maintenance Manual (960-364/365)
4.25 LCD Module