4.10 FDD
4.10 FDD
Removing the FDD
To remove the FDD, follow the steps below and refer to figures 4-26 and 4-27.
1. Disconnect the FDD SUMI card from PJ2007 on the system board.
2. Lift out the FDD.
PJ2007
NOTE: You do not have to disassemble the FDD, as described below, unless you are
going to replace it.
Satellite1400/2400 Maintenance Manual (960-364/365)
FDD SUMI card
Figure 4-26 Removing the FDD
4 Replacement Procedures
FDD
Frame of FDD unit
Touch Pad
Battery board
4-43