Touch Panel Adjustment; Marketing Area; Image Data Clear - Konica Minolta bizhub 250 Service Manual

15. Initial Mode
15.3.2

Touch Panel Adjustment

Functions • To adjust the position of the Touch Panel display
• Make this adjustment if the Touch Panel is slow to respond to a pressing action.
Use
• When the control panel is replaced.
1. Touch [Touch Panel Adjustment] from the Initial mode screen.
2. Following the arrow mark, touch the four points (+) sequentially on the screen using a
pen.
NOTE
• Be sure to touch the very center of each point.
• Use care not to damage the screen surface with the tip of the pen.
1
Adjustment
Procedure
3
15.3.3

Marketing Area

Functions • To specify the marketing region.
• When the marketing area is changed.
Use • Fixed zoom ratios shown on the screen, the default values for Total Clear, and related
items are changed according to the setting.
1. Touch [Marketing Area] from the Initial mode screen.
Setting/
2. Select the appropriate marketing area and touch [END].
Procedure
15.3.4

Image Data Clear

Functions
• To clear all image data stored on the memory of the MFBS Board.
Use
Setting/ 1. Touch [Image Data Clear] from the Initial mode screen.
Procedure 2. Select [Yes] and touch [Enter].
210
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Japan U.S.
Field Service Ver. 1.0 Aug. 2005
2
4
Europe Others
4040F3E557DA