Turning On The Power; Turning On The Main Power - Lanier 5622 AG Operator's Manual

Lainer printer operator guide
Table of Contents

Advertisement

Turning On the Power

To turn the machine on, press the op-
eration switch.
Note
❒ This machine automatically enters
Energy Saver mode or turns itself
off if you do not use the machine
for a while. ⇒ p.77 "Timer Set-
ting".
-
- Power switches
-
-
This machine has two power switch-
es.
❖ ❖ ❖ ❖ Operation switch (right side of the
control panel)
Press this switch to activate the
machine. When the machine has
warmed up, you can make copies.
❖ ❖ ❖ ❖ Main power switch (left side of the ma-
chine)
When the machine is not to be used
for an extended period of time,
turn off the main power switch.

Turning On the Main Power

A A A A
Make sure that the power cord is
firmly plugged into the wall out-
let.
B B B B
Open the switch cover and turn
on the main power switch (make
sure that the Main Power indica-
tor goes on).
Important
❒ Do not switch off the main pow-
er immediately after it has been
switched on. Failure to observe
this may result in damage to the
hard disk or memory, leading to
malfunctions.
Turning On the Power
ZFFH110N
1
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

5627 ag56225627

Table of Contents