Lanier 5722 Operator's Manual page 105

4. JOB MEMORY (Cont.)
4 Press the MEMORY1 (or, MEMORY2 , ME
MORY3 , MEMORY4 ) key.
● The combination of copy modes is stored in
mode memory 1 (or, 2, 3, 4)
● Stored combinations of copy modes remain
until new ones are entered. They are not
erased even when the power switch is turned
OFF.
Recalling a Stored Combination of Copy Modes
1
Press the PROGRAM key to enter the
Program menu, and then press the JOB
MEMORY key.
2 Press the RECALL key.
Press the key for the combination of copy
3
modes you want to recall.
Press the START key. The original is copied
4
in the combination of modes you have
recalled.
102